Hey guys,
I am using Bambu lab sunflower yellow. I have dried it, and washed my plate. With this particular filament the first layer looks like shit, but the rest of the print turns out fine. Other filaments have proper thick lines of equal height and so on.
I only have a problem with this particular color sinw opening the filament. Is it just the filament being shit or you can think of anything else I could check?
It looks to me like the nozzle is too close to the bed. This seems to be a common issue with a couple of possible causes. Have you checked if the four screws that hold the hotend to the linear rail are screwed in correctly?